Southampton, PA Electrician for Panel Upgrades, Remodels and Repairs
Panel upgrades, subpanels, remodel wiring, lighting, generators, EV chargers and emergency service across Upper Southampton Township and central Bucks County, with a flat price you approve before we start.
- ●HIC License PA197924
- ●15+ Years Experience
- ●OSHA 30 Certified Technicians
- ●Fully Insured
- ●Same Day Service Available
- ●Upfront Flat Pricing
TotalPower Electrical Services is a licensed electrical contractor serving Southampton, PA and Upper Southampton Township with panel upgrades, subpanels, remodel wiring, lighting, generators, repairs and emergency service. The company holds HIC License PA197924, employs OSHA 30 certified technicians, has 15 plus years of experience, and quotes flat pricing before work begins.
One thing worth clearing up before anything else, because it trips up homeowners and contractors alike. Southampton addresses in 18966 sit in Upper Southampton Township. Feasterville addresses just down the road in 19053 sit in Lower Southampton. Two separate municipalities, two separate code offices, similar names, about two miles apart. We check which one covers your property before we file anything.
The housing here is mostly 1950s through 1970s ranchers, splits and colonials on comfortable lots, with newer infill mixed in. Almost none of it has knob and tube. What it has instead is original panels that were sized for a much smaller electrical life, now carrying a remodeled kitchen, central air, a finished basement and often a car. Our crews also work daily in the city as licensed electricians in Philadelphia, so both ends of that range are routine.
What Electrical Service Work Covers and the Signs Your Panel Is Out of Capacity
Electrical service work runs from the utility connection at your meter to the last device on the last circuit. That covers the service entrance, meter socket, main panel and breakers, subpanels and feeders, the grounding and bonding system, every branch circuit, and all the devices they feed. A licensed electrician runs the load calculation before adding anything major, because a panel that looks fine on the wall can already be over on paper.
A homeowner off Second Street Pike called us during a kitchen renovation. Her contractor had assumed the existing circuits would carry the new layout. A modern kitchen needs at least two dedicated small appliance circuits plus separate ones for the dishwasher, disposal, microwave and range, and her panel had two open slots. The fix was a subpanel rather than a full service upgrade, and it cost about a third of what she had been quoted elsewhere.
Call an electrician if you notice any of the following:
- A panel with no open slots, or tandem breakers doubled into most positions
- A 100 or 150 amp service running central air, a finished basement and modern appliances
- Plans for a kitchen or bath remodel, a basement finish, a hot tub or an EV charger
- Breakers that trip when two large appliances run at once
- Lights that dim when the AC compressor, dryer or dishwasher starts
- Outlets or switch plates that feel warm, or show scorch marks
- A Federal Pacific Stab-Lok or Zinsco panel, both known for breakers that fail to trip
- Aluminum branch wiring in homes or additions from the late 1960s and early 1970s
- Circuits added by a previous owner with no permit record
- Buzzing from a switch, a receptacle or the panel itself
Our Electrical Services in Southampton, PA
One crew, one point of contact, and nothing handed off to a subcontractor you never met.
Electrical Panel Upgrades and Service Changes
Moving a 100 or 150 amp service up to 200 amps when the load calculation genuinely calls for it. We handle the meter socket, service entrance cable, new load center and the PECO coordination. Same standards as our residential electrical services across the region.
Subpanel Installation
When the main panel is out of slots but the service itself is adequate, a subpanel is usually the cheaper and faster answer. It gives a remodeled kitchen, finished basement or garage its own set of circuits without touching the meter. Covered by our circuit and subpanel installation.
Kitchen and Bath Remodel Wiring
Two dedicated small appliance circuits, separate feeds for dishwasher, disposal, microwave and range, GFCI at the counters and AFCI protection throughout. We work to the contractor’s schedule and rough in before drywall so nothing has to be reopened later.
Electrical Repairs and Troubleshooting
Dead outlets, half-working circuits, GFCI devices tripping without cause, breakers that will not reset. We trace faults with meters and thermal imaging rather than guesswork. Most single-fault electrical repairs and fault tracing finish in one visit.
Older Panel and Wiring Replacement
Federal Pacific and Zinsco panels have a documented history of breakers that fail to trip, and replacement breakers do not fix it. Aluminum branch wiring in early 1970s builds gets pigtailed with approved connectors. We test before recommending either, because nobody should replace a panel on a hunch.
Lighting Installation and Upgrades
Recessed LED cans, under cabinet runs, exterior floods, landscape lighting, dimmer conversions and fixture swaps. Ranchers and splits here often have shallow ceiling cavities, so we check clearance before anyone orders housings. See our kitchen and interior lighting installation.
Generator Installation and Hookups
Whole home standby units with an automatic transfer switch, or a portable generator inlet with a code compliant interlock kit. Storms take out power across central Bucks regularly, and homes on well and septic lose water along with the lights. Details on standby generator and transfer switch work.
EV Charger Installation
Level 2 chargers on a dedicated 40 to 60 amp circuit, hardwired or on a NEMA 14-50 receptacle. Attached garages here keep runs short. When the calculation comes out tight, a load management device is often a better answer than a full service upgrade.
Basement, Hot Tub and Outdoor Wiring
Finished basements need adequate circuits, AFCI protection and proper egress lighting. Hot tubs need a dedicated GFCI circuit and a disconnect within sight. We also run smart home and structured wiring while the walls are still open.
Emergency Electrical Service
Partial power loss, a burning smell, water in the panel, storm damage to the service mast. Those do not wait until Monday. Call 267-312-8232 for emergency electrical service calls, and we will tell you what to shut off while we are on the way.
Why Upper Southampton Property Owners Choose TotalPower
You get a flat price before the work starts. We diagnose, we quote, you approve. No clock running while somebody works out what is needed, and no change orders appearing after the drywall is up.
Load calculations come before recommendations. Plenty of contractors quote a service upgrade for every remodel or EV charger because it is the bigger ticket. Sometimes that is right. Often a subpanel or a load management device does the job for a fraction of the cost, and you deserve to know which situation you are in before you commit.
Permits go to the right office. Upper and Lower Southampton are separate townships with separate code offices, and the similar names cause real confusion. We confirm from your address before filing, because a misdirected application costs you a week.
Remodel work gets sequenced properly. We rough in before drywall, coordinate inspection with your general contractor’s schedule, and come back for trim out when the finishes are ready. Nobody wants an electrician cutting into a finished kitchen.
Every technician on the truck holds OSHA 30 certification, and we handle commercial electrical contracting alongside residential. Work gets documented with photographs of terminations, panel interiors and finished installs. Browse finished projects in our gallery before deciding whether to call.
Same day slots stay open on weekdays for repair calls. If the schedule is genuinely full, we say so rather than leaving you waiting on a truck that is not coming.
Our Process, From First Call to Final Inspection
-
Call or message with the details
Give us the address, what you want done, and your panel size and roughly how full it is. If it is a remodel, tell us your contractor’s timeline. We can often scope the job on the phone before dispatching anyone.
-
On site assessment and load calculation
For anything that adds load, we calculate rather than estimate. That determines whether you need a new circuit, a subpanel, a load management device or a full service upgrade. You get a written flat price for whichever it turns out to be.
-
Permit and scheduling
Panel upgrades, subpanels, new circuits, remodel wiring, hot tub circuits and generators get filed with Upper Southampton Township and scheduled with the inspector. Remodel work gets slotted to hit the rough inspection before drywall.
-
The work, done to code
Drop cloths down, circuits labeled, terminations torqued to spec, work areas cleaned each day. On multi-day jobs we restore essential circuits before leaving each evening so the house stays livable.
-
Inspection, walkthrough and paperwork
The inspector signs off, we walk you through what changed, and you keep the permit records and photos for your files or a future buyer. Then you call us directly if anything acts up later.
How Much Does an Electrician Cost in Southampton, PA
Four things move the price: what the load calculation shows, the distance and difficulty of the runs, whether the meter or service has to change, and whether the utility needs to disconnect. A subpanel often solves the same problem as a service upgrade for a third of the cost, which is exactly why the calculation comes first.
The ranges below reflect recent work in Southampton and the surrounding central Bucks townships. Your written quote might land outside them, and we will explain exactly why if it does. We do not quote low to get in the door and revise upward later.
| Job | Typical range | What moves the price |
|---|---|---|
| Service call and diagnosis | $150 to $350 | Number of circuits involved, access, time of day |
| Outlet, switch or fixture replacement | $150 to $400 | Box condition, ceiling height, fixture weight |
| Dedicated circuit added | $400 to $1,000 | Distance from panel, finished walls, spare panel space |
| Subpanel installation | $1,200 to $2,800 | Feeder length, panel size, conduit vs cable run |
| Kitchen remodel circuit package | $2,000 to $5,000 | Circuit count, panel capacity, access before drywall |
| 100 or 150 to 200 amp panel upgrade | $1,900 to $4,500 | Meter location, mast condition, permit and inspection |
| Aluminum wiring pigtail remediation | $1,500 to $5,000 | Number of devices, access, whether boxes need replacing |
| Level 2 EV charger install | $800 to $2,400 | Run length, garage location, load management if needed |
| Standby generator with transfer switch | $6,000 to $16,000+ | Unit size, gas line work, pad and clearances |
Estimates for planned projects are free. Diagnostic calls carry a service fee that we tell you before dispatch, and it gets credited toward the repair if you move forward the same day. Compare our service capacity upgrades if you are weighing a subpanel against a full service change.
Areas We Serve Around Southampton and Central Bucks County
We cover all of Upper Southampton Township, including the Tamanend area and the neighborhoods off Street Road, Second Street Pike, Bristol Road and County Line Road, across zip code 18966. Feasterville sits next door in Lower Southampton Township with its own code office, and we work there too, but the two permit separately.
Nearby we take calls in Churchville, Richboro, Holland, Ivyland, Warminster, Hatboro, Huntingdon Valley, Newtown, Langhorne and Bensalem, along with the rest of Bucks County. Philadelphia is where the company started, so we still run daily in Northeast Philadelphia, including Somerton and Bustleton, plus Center City, Northwest Philadelphia, West Philadelphia and South Philly, along with Roxborough, Germantown, Kensington and Fishtown.
Farther out we handle residential and commercial work in Montgomery County, Delaware County and Chester County. Not sure whether your address falls inside our range? Call and ask. It takes about thirty seconds.
Electrician Southampton PA Frequently Asked Questions
How much does an electrician cost in Southampton, PA?
Most Southampton service calls run between $150 and $350 for diagnosis and a small repair. Panel upgrades usually land between $1,900 and $4,500, a subpanel typically runs $1,200 to $2,800, and a kitchen remodel circuit package between $2,000 and $5,000. We quote a flat price before any work starts.
Is Southampton PA in Upper or Lower Southampton Township?
Southampton addresses in the 18966 zip are in Upper Southampton Township. Feasterville addresses in 19053 are in Lower Southampton Township. They are two separate municipalities with separate code offices about two miles apart, and the similar names cause frequent confusion. We confirm which one covers your property before filing.
Do I need a permit for electrical work in Upper Southampton Township?
Yes, for most work beyond a simple fixture swap. Panel upgrades, subpanels, new circuits, remodel wiring, hot tub circuits and generators all require a permit and inspection under the Pennsylvania Uniform Construction Code. We file with the township and hand you the closeout paperwork.
What is a subpanel and do I need one?
A subpanel is a smaller breaker box fed from your main panel that adds circuit capacity without changing your service size. You need one when the main panel has no open slots but the service itself is adequate, which is common in Southampton homes after a kitchen remodel or basement finish.
How many circuits does a kitchen remodel need?
At minimum two dedicated 20 amp small appliance circuits for the counters, plus separate circuits for the dishwasher, disposal, microwave and range. Add lighting and any specialty appliances. Most 1960s and 1970s Southampton kitchens were built with a fraction of that, which is why panel capacity comes up during remodels.
What are the signs I need an electrical panel upgrade?
A panel with no open slots and tandem breakers doubled into most positions, a 100 or 150 amp service running central air and modern appliances, breakers tripping when two appliances run together, or lights dimming when the compressor cycles. Warm panel covers or scorch marks mean you should call right away.
Can you do same day electrical repairs in Southampton?
Yes. We hold open slots each weekday for same day calls across Upper Southampton, Churchville, Holland and Richboro, and we run emergency service for power loss, burning smells and sparking outlets. Call 267-312-8232 early in the day for the best chance at a same day arrival.
Is TotalPower Electrical licensed and insured?
Yes. TotalPower Electrical Services LLC carries HIC License PA197924 and liability insurance, and our technicians hold OSHA 30 certification. We register with the township whenever a permit requires it, and we can send our insurance certificate to your general contractor, HOA or property manager before we start.
Is a Federal Pacific panel dangerous?
It can be. Federal Pacific Stab-Lok breakers have a documented history of failing to trip under fault conditions, which means an overloaded circuit can keep heating instead of shutting off. Replacement breakers do not fix it. The accepted remedy is replacing the panel, and we test before recommending that.
How long does an electrical panel upgrade take?
Most 200 amp panel upgrades take one full day, roughly six to nine hours on site. Add time if PECO has to disconnect and reconnect the service drop, or if the meter socket needs replacing. A subpanel installation is usually a half day. Inspection follows within a few business days.
Does a finished basement need AFCI protection?
Yes, in most cases. Current code requires arc fault protection on branch circuits serving finished living spaces, and a finished basement counts. Basements also require GFCI protection on receptacles. Both get inspected, so basement work done without a permit usually has to be corrected before a sale.
Can I do my own electrical work in Pennsylvania?
Homeowners can legally do limited work on a property they own and occupy, but permits and inspections still apply. Anything touching the panel, service entrance or new circuits carries real shock and fire risk and often fails inspection when done without training. Insurance claims also get denied for unpermitted DIY wiring.
Is a whole house surge protector worth it?
Usually yes in a home with modern equipment. A panel mounted device clamps surges before they reach HVAC control boards, appliance electronics and network gear, which power strips cannot do for hardwired equipment. It installs in about an hour, on its own or during a panel upgrade.
Do you install hot tub and outdoor circuits?
Yes. A hot tub needs a dedicated GFCI protected circuit sized to the unit and a disconnect within sight of it, and the run usually requires trenching in conduit rated for direct burial. All of it is permitted and inspected work. We size the circuit from the manufacturer’s specification.
How do I book an electrician with TotalPower?
Call or text 267-312-8232, email Totalpowerpa@gmail.com, or send the form on our contact page. Tell us your address, what you want done, and your panel size if you know it. We confirm an arrival window, give you a flat price on site, and begin once you approve it.
Talk to a Licensed Electrician in Southampton Today
A kitchen renovation that needs circuits nobody planned for, or a panel that ran out of room two projects ago. TotalPower Electrical Services runs the calculation, gives you a straight recommendation and a flat price before anything gets opened up. Fifteen years, HIC License PA197924, OSHA 30 certified crews, and a phone that gets answered!
Call 267-312-8232, email Totalpowerpa@gmail.com, or send us the details. You can also open our Google Maps listing.