Electrical Panel Upgrades and 200 Amp Service Changes
Fuse box replacement, 100 to 200 amp upgrades, meter socket and service disconnect work for homes in Lansdale, Montgomery County and Philadelphia. Written flat price, permit and inspection included.
Serving Lansdale, the North Penn area, Montgomery County, Bucks County and Philadelphia. 83 Google reviews, rated 5.0.
- ●HIC License PA197924
- ●15+ Years Experience
- ●OSHA 30 Certified Technicians
- ●Fully Insured
- ●Same Day Service Available
- ●Upfront Flat Pricing
An electrical panel upgrade replaces an outdated or undersized panel, and often the meter socket and service entrance, so your home can safely carry modern loads like EV chargers, heat pumps and kitchen appliances. TotalPower Electrical Services handles 100, 200 and 300 amp upgrades, fuse box replacement and meter socket work across Lansdale, Montgomery County and Philadelphia, with permits, utility coordination and inspection included.
Most of the panel work we do falls into three groups: fuse boxes that are still in service, 60 and 100 amp services that cannot carry what the house now asks of them, and panels with a known history of breakers that fail to trip. Each one ends the same way, with a properly sized, labeled breaker panel, correct grounding and bonding, and a signed off inspection.
Where you live changes the paperwork. Inside Lansdale Borough, the borough runs its own electric department and requires an electric permit for new service and meter installation. Most surrounding townships and Philadelphia are served by PECO. We confirm which utility and which code office cover your address before anything is scheduled.
Signs Your Home Needs a Panel or Service Upgrade
A panel upgrade is rarely urgent until it suddenly is. These are the signs we look for on a first visit:
- A fuse box still in service, or fuses that blow often
- A 60 or 100 amp service in a home with central air, an electric range or a dryer
- Plans for an EV charger, heat pump, hot tub or finished basement
- Breakers that trip under normal load or will not reset
- A Federal Pacific Stab-Lok, Zinsco or Challenger panel
- Rust, water marks, scorching or a burning smell at the panel
- No open slots left, or double tapped breakers squeezed in
- A corroded, loose or damaged meter socket or service mast
- An insurer or home inspector asking for the panel to be replaced
If you notice heat, buzzing or scorch marks at the panel, stop using the affected circuits and call us. That is not a wait until next month problem.
Panel and Service Upgrade Services
One crew handles the full job, from load calculation to final inspection, without handing it off to a subcontractor.
200 Amp Service Upgrades
Moving a 60 or 100 amp service up to 200 amps, including load calculation, new meter socket, service entrance cable, grounding and a new load center. 300 amp services are available for larger homes.
Fuse Box Replacement
Replacing an old fuse box with a modern breaker panel, correcting grounding and bonding, and labeling every circuit. This often resolves insurance questions for older homes.
Panel Replacement
Swapping out damaged, overloaded or recalled style panels such as Federal Pacific and Zinsco with a new panel sized for your home.
Meter Socket Replacement
Replacing corroded, loose or burned meter sockets and service equipment, coordinated with Lansdale Borough Electric or PECO for the disconnect and reconnect.
Outdoor Service Disconnects
Installing exterior main disconnects for service upgrades, generators and solar, so the home can be shut off safely from outside.
Subpanels
Adding subpanels for garages, basements, additions and workshops when the main panel is out of space but the service has capacity.
Load Calculations
Working out what your service can actually carry before you add an EV charger, heat pump or addition, so you only upgrade when you need to.
Grounding and Bonding
Bringing grounding electrodes, water pipe bonds and panel bonding up to code, a common gap in older Lansdale and Philadelphia homes.
Surge Protection
Whole home surge protective devices installed at the panel to help protect electronics and appliances.
Recent Panel and Service Work
Real jobs completed by TotalPower crews. No stock photos.






See more finished jobs on our recent projects page.
What Customers Say
“TotalPower Electrical Services LLC did a great job replacing my old, corroded 100 amp meter socket. It was starting to become a safety concern, and they handled everything quickly and professionally.”Sprajd O. Google review
“TotalPower Electrical Services did a great job upgrading my old 100 amp service. The before setup was outdated and messy, but now everything is clean, safe, and professionally done.”Floret E. Google review
“They upgraded my panel and installed new lighting with no issues.”Laourent C. Google review
Why Homeowners Choose TotalPower for Panel Upgrades
You see the price before we start. We open the panel, check the meter, mast and grounding, and give you a written flat price. No hourly clock, no surprise change orders.
We handle the utility and the permit. Lansdale Borough Electric, PECO, Philadelphia and each township run their own process. We file with the right office and schedule the disconnect and reconnect, so you do not have to chase anyone.
Every technician holds OSHA 30 certification, and the company carries HIC License PA197924 and full insurance. Service changes are the most dangerous work in residential electrical, and procedure matters more than speed.
We photograph the panel interior, terminations and finished work, and you keep the permit and inspection records. That paperwork matters for insurers, buyers and landlords.
How a Panel Upgrade Works
-
Call or text a photo of your panel
A photo of the panel and meter, plus your address, tells us a lot: the panel brand, the service size and which utility and code office cover the job.
-
On site check and written quote
We run a load calculation, inspect the meter socket, mast and grounding, and give you a flat price with what is and is not included.
-
Permit and utility scheduling
We file the permit and book the disconnect and reconnect with Lansdale Borough Electric or PECO.
-
Upgrade day
Most 200 amp upgrades take one working day. Power is off for part of the day and back on the same evening, with every circuit labeled.
-
Inspection and handover
The inspector signs off and we walk you through the new panel. You keep the photos and permit records.
How Much Does a Panel Upgrade Cost?
Four things move the price: the service size you need, the condition of the meter socket and mast, how far the panel moves, and how much grounding work is needed. These ranges reflect recent work in Lansdale, Montgomery County and Philadelphia. Your written quote may land outside them, and we will explain why if it does.
| Job | Typical range | What moves the price |
|---|---|---|
| Fuse box replaced with breaker panel | $1,800 to $4,200 | Service size, grounding upgrade, meter and mast condition |
| 60 or 100 to 200 amp upgrade | $1,900 to $4,600 | Meter location, utility coordination, permit and inspection |
| Meter socket replacement | Quoted on site | Socket type, mast condition, utility scheduling |
| Subpanel installation | Quoted on site | Distance from main panel, number of circuits |
| Dedicated circuit added | $400 to $1,000 | Distance from panel, wall finish, spare panel space |
Estimates for planned upgrades are free. If an EV charger is driving the upgrade, see our EV charger installation page, because sometimes load management avoids a full service change.
Get a Free Estimate
Send a photo of your panel and meter with your town, and we will tell you whether you need a full upgrade, a panel swap or just a repair.
- Written flat price before any work starts
- Permits filed with the correct borough, township or city office
- Same day slots on weekdays for repair calls
Prefer to send details?
Tell us your town, the job and a good time to call. We reply with next steps and an arrival window.
Send your job details or email Totalpowerpa@gmail.com.
Panel Upgrades Across Lansdale, Montgomery County and Philadelphia
We upgrade panels throughout Lansdale and the North Penn area, Montgomery County, Bucks County and Philadelphia. Lansdale Borough addresses coordinate with Lansdale Borough Electric; most other areas coordinate with PECO.
- Lansdale
- North Wales
- Blue Bell
- Ambler
- Horsham
- Fort Washington
- Warminster
- Abington
- Jenkintown
- Bensalem
- Newtown
- Havertown
- Philadelphia
- All areas we serve
Related services
Electrical Panel Upgrade Questions
How do I know if I need an electrical panel upgrade?
Common signs are a fuse box, a 60 or 100 amp service in a home with modern appliances, breakers that trip under normal load, no open breaker slots, or plans for an EV charger, heat pump or addition. Rust, scorching or heat at the panel means you should call right away.
How much does a 200 amp panel upgrade cost?
Most 60 or 100 to 200 amp upgrades we complete fall between $1,900 and $4,600. The meter socket and mast condition, how far the panel moves, grounding work and utility coordination move the price. You get a written flat price before work starts.
How long does a panel upgrade take?
Most 200 amp upgrades take one working day on site, with power off for part of the day and restored the same evening. Inspection usually follows within a few business days.
Do I need a permit to upgrade my electrical panel in Pennsylvania?
Yes. Panel replacements and service upgrades require a permit and inspection. We file with the correct office for your address, whether that is Lansdale Borough, a surrounding township or Philadelphia.
Who handles the utility for a service upgrade in Lansdale?
Inside Lansdale Borough, the borough runs its own electric department and requires an electric permit for new service and meter installation. We file the permit and schedule the disconnect and reconnect. Outside the borough, we coordinate with PECO.
Is a fuse box safe?
A fuse box in good condition with correctly rated fuses is not automatically unsafe. The risk comes from oversized fuses put in when fuses keep blowing, which removes the protection. Most fuse boxes also lack the capacity and grounding a modern home needs.
Should I replace a Federal Pacific or Zinsco panel?
We recommend it. Federal Pacific Stab-Lok and Zinsco panels have a long record of breakers that may fail to trip during an overload. Many insurers and home inspectors flag them as well.
Do I need a panel upgrade for an EV charger?
Not always. A load calculation shows whether your current service can carry a Level 2 charger. Many 200 amp homes can, while 60 and 100 amp services usually need an upgrade first.
Can you replace a corroded meter socket?
Yes. We replace corroded, loose or burned meter sockets and the related service equipment, and coordinate the disconnect and reconnect with the utility.
Do you install 300 amp services?
Yes. Larger homes, homes with all electric heating or multiple EV chargers sometimes need 300 amp service. We size it with a load calculation first.
Will a new panel lower my insurance premium?
It can help. Some insurers charge more for, or decline, homes with fuse boxes or certain older panels. A permitted panel replacement with inspection records usually resolves that question.
How do I get a panel upgrade estimate?
Call or text 267-312-8232 with a photo of your panel and meter and your town, or send the form on this page. Estimates for planned upgrades are free.
Ready to Upgrade Your Panel?
Whether it is an old fuse box, a full 100 amp panel or a corroded meter socket, TotalPower gives you a straight answer and a flat price before anything is opened up.
Call 267-312-8232, email Totalpowerpa@gmail.com, or send us your job details. You can also find us on Google Maps.